SUBJECT: ANOTHER UFO DECTECTOR FILE: UFO1607 (439) Tue 31 Dec 91 11:35 By: Mike Christol To: Bruce Alexander Re: Re: Detector St: <219 ------------------------------------------------------------------------------ In a message to John Feilke <12-28-91 13:43> Bruce Alexander wrote: BA> _______________ BA> / \ BA> | _______ | BA> Glass housing-->| I.......I | BA> | I: : | BA> | I:<-----:------|--To battery BA>+ BA> | I: : | BA> | I:..... : | BA> | I:: .:.:..<---|--Wire loop BA> L-strut --|--->I:: : | to battery BA>- BA> | I:: : | BA> | I:: MMMMM<---|--Magnet BA> | I:: | BA> | I:: | BA> \ I:: / BA> |__I::__________| BA> BA>BBBBBBBBBBBBBBBBBBBBBBB<--Base(wood) BA> :: BA> .............::............. BA> : : BA> : : BA> __________ : : ____________ BA> | |+ -| BA>| BA> | Battery | | Buzzer BA>| BA> | | BA>+|____________| BA> |__________|- : BA> :..........................: BA> BA> OK, John, here it is. It can be constructed for the BA>price of a 12v battery, a door buzzer or bell a magnet and BA>some wire. The housing is a large jar such as BA>institutional size foods come in. The base is a simple BA>wood block and the strut can be a coat hanger. The rest BA>should be self explanatory, but if you have any questions, BA>feel free. This can be made the size of a small half quart jar also. You can power it on 3 to 6 volts, depending own whether or not you can get a buzzer from Radio shack which operates off of 3 or 6 volts. You can attatch the whole battery buzzer complex to the jar with peel and stick material. You can also make a self contained detector using a 9 volt battery, a magnetic door sensor and a buzzer. Oh, yes, you can have two lights also, one that lights up when the buzzer goes off and a Left/off/right position switch which will allow only the light to be on, without the buzzer, for use in sustained activation. Three position | switch --|-- /\ Two lamps side | | ( ) by side -----------------------------|---|--------------------(-)---- | Magnetic ___ | | Door Switch / \ | | -------- ----- / 9 vlt. \ | | | | | + | |buzzer || | | | | | | || | |9vlt | | | __ \ / | | |Btry. | | | / \ \ ___ / | | | | | | | | | | | | | - | \ __ / | | -------- ----- Small 1/2 in mag. | ------------------------------------------------------------- Now Just wire this circuit up to the battery, buzzer, magnetic swith, lamps and three position switch, and you have yourself a portable UFO DETECTOR. I suggest you use a hot glue gun to anchor these pieces in place. You can buy all the components at radio shack for about $20 dollars, maybe less. By the way, this diagraham is not my property. A friend of mine in Calfiornia makes these and sells them. If you would rather buy one from him, His name and address are as follows. Mike Contrearas 13831 Bora Dr. LaMirada, Ca. 90638 Phone: (213) 921-0306 He sells them for about $30 each. I hope this helps you. REgards, Mike ********************************************** * THE U.F.O. BBS - http://www.ufobbs.com/ufo * **********************************************