Received: from hub.eecs.nwu.edu by gaak.LCS.MIT.EDU via TCP with SMTP id AA27488; Tue, 5 Feb 91 00:45:42 EST Resent-Message-Id: <9102050545.AA27488@gaak.LCS.MIT.EDU> Received: from uunet.UU.NET by delta.eecs.nwu.edu id aa22773; 4 Feb 91 16:14 CST Received: from inmos-c.inmos.com by uunet.UU.NET (5.61/1.14) with UUCP id AA08455; Mon, 4 Feb 91 17:12:38 -0500 Newsgroups: comp.dcom.telecom Path: andyr From: Andy Rabagliati Subject: Re: How do you Program This Phone? Message-Id: <1991Feb4.220711.4530@inmos.COM> Organization: SGS-Thomson/Inmos Division References: <16388@accuvax.nwu.edu> Date: Mon, 4 Feb 91 22:07:11 GMT Apparently-To: uunet!comp-dcom-telecom Resent-Date: Mon, 4 Feb 91 23:46:53 CST Resent-From: telecom@eecs.nwu.edu Resent-To: ptownson@gaak.LCS.MIT.EDU Status: R [Part 2 of 2 of Motorola programming manual ] 4.3 Programming Procedure Programming for a single phone number can be as quick as a four-step process or may take up to 11 steps, depending on how many programable features you wish to review or change. The phone always has some information programmed for each of the features, whether that information is standard programming performed at the factory or information provided by someone who programmed the unit previously. If, while you are programming, you are satisfied with the value already programmed for a particular feature, simply press * to move to the next feature. At any time that a two-digit step number (01-11) appears in the display, you may store all the information programmed in the phone by pressing SND to return to normal phone operation. In order to perform the following steps, it is necessary for you to refer to the completed NAM Programming Data Table. If you enter a digit incorrectly, press the Clr button and start again. Enter/Press Step on the Keypad Display Comment 01 Ready for step 1 la * Current System I.D. Factory Setting 000000 lb New system ID xxxxxxx New system ID lc * 02 Ready for step 2 2a * Current area code Factory setting 111 2b New area code xxx New area code 2c * 03 Ready for step 3 3a * Current phone Factory setting 1110111 number 3b New phone xxxxxx New phone number number 3c * 04 Ready for step 4 4a * Current station Factory setting 06 or 14 class mark. for portable/personal,12 for standalone mobile. 4b New station xx New station class mark class mark 4c * 05 Ready for step 5 5a * Current access overload class 5b New access xx New access overload overload class class 5c * 06 Ready for step 6 6a * Current Group ID Factory Setting 00 6b New group ID xx New group ID 6c * 07 Ready for step 7 7a * Current security code Factory setting 000000 7b New security xxxxxx New security code code 7c * 08 Ready for step 8 8a * Current unlock code Factory setting 123 8b New unlock xxx New unlock code code 8c * 09 Ready for step 9 9a * Current initial Factory setting 0334 paging channel 9b New initial xxxxxx New initial paging paging channel channel 9c * 10 Ready for step 10 10a * Current options Factory setting 010100 10b New options xxxxxx New options 10c * 11 Ready for step 11 lla * Current options Factory setting 000 llb New options xxx New options llc * 01 or 01 2 Ready for review or programming second phone number 4.4 Reviewing of NAM Programming Once you have completed the programming steps, review the information by repeatedly pressing *. Check to make sure that the information programmed matches what you wrote in the NAM Programming Table. Make any required changes. 4.5 Storing the Information If you are programming a single phone number, press SND to store the programming information when you are satisfied that it is all correct. A two-digit step number (01-11) must appear in the display in order for you to store the data. Press * until one appears and then press SND. Your personal or portable cellular telephone is now ready for normal use, if you are programming a single phone number. 4.6 Programming the Second Telephone Number If 01 2 appears in the display after you have pressed SND to store the programming information for the first phone number, you are ready to repeat some or all of the ten steps, this time for a second phone number. The 01 indicates that you are ready to enter the System ID information (step l) and the 2 indicates that you are programming information for the second telephone number. The phone assigns the same security and lock codes (steps 7 and 8) for the second phone number and as so skips from step 6 to step 9. There is no step 11 when programming a second phone number. If 01 2 did not appear after programming the first phone number, and you wish to program a second number, either the second telephone option has not been selected (step 10) or your phone is not equipped for dual system operation. Once you have completed the programming steps, review the information by repeatedly pressing *. Check to make sure that the information programmed matches what you wrote in the NAM Programming Table. Make any required changes. Press SND to store the programming information when you are satisfied that it is all correct. (A two-digit step number (01-10) must appear in the display.) Your personal or portable cellular telephone is now ready for normal use. 5. BEFORE CALLING FOR SERVICE If you experience operating difficulties, check the following before making a call for service. * Have you read your User's Manual ? Everything you need to know to operate your cellular telephone is in your User's Manual. Take the time to read it and become familiar with all the features of your telephone before calling for service. Note that not all of the features discussed below are included in all telephone models. * If your telephone is equipped with Vehicular Speaker Phone (V.S.P.), do you hear excessive feedback noise during a V.S.P. call ? Because of audio variations in the cellular system, excessive feedback noise or howling may sometimes be heard when a full duplex (if your telephone is so equipped) V.S.P. call is placed or received. If this occurs, decrease the speaker volume using the volume control of the side of the handset. Motorola's full duplex Vehicular Speaker Phone is designated V.S.P. 11. * Have you unlocked your unit ? Your cellular telephone is inoperative when locked as indicated by the word Locked in the display. To unlock the telephone, enter your 3-digit lock code. The word Locked will disappear. * Is the red NS (No Service) indicator lighted ? This may indicate that you are outside the service area or in a marginal reception area. Marginal reception may also be indicated by a fast busy or alternating high-low sound when attempting to place a call. * Have you programmed a unique operating mode into the unit ? Constant flashing of the yellow Roam or Rm indicator or illumination of the red No Svc or NS (no service) indicator while in your home service area may indicate an undesired roam characteristic choice has been selected. See "Roaming and System Operation" in your User's Manual. NAM PROGRAMMING DATA TABLE Step number Description No. of digits Source 01 System ID Numbcr 5 Digits System Operator 02 Cellular Area Code 3 Digits System Operator 03 Cellular Phone Number 7 Digits System Operator 04 Station Class Mark 2 Digits System Operator (Usually 14 for 832 channels 12 for Standalone mobile) 05 Access Overload Class 2 Digits System Operator 06 Group ID Mark 2 Digits System Operator 07 6-Digit Security Code 6 Digits Telephone Owner 08 3-Digit it Unlock Code 3 Digits Telephone Owner 09 Initial Paging Channel 4 Digits System Operator (Usually 0333 or 0334) 10 Option Programming 6 Digits /--------- Handset Internal 1 Digit Telephone owner | Speaker disable | If your installation contains a separate External Speaker/VSP unit | The handset internal speaker must be disabled. | 1 = disabled, 0 = enabled. This bit normally enabled. |/-------- Local Use 1 Digit System Operator || ( Normally enabled 1 = Enabled 0 = Disabled ) ||/------- MIN Mark 1 Digit System Operator ||| ( Normally disabled 1 = Enabled 0 = Disabled ) |||/------ Auto Recall 1 Digit Always 1 |||| ||||/----- 2nd Phone No 1 Digit Telephone Owner ||||| ( Normally disabled 1 = Enabled 0 = Disabled ) ||||| |||||/---- Diversity 1 Digit Telephone Owner |||||| (based on the number of antenna ports with which your cellular |||||| phone is equipped O = Standard 1 antenna; |||||| 1 = optional two antennas ______ Optional programming data entry 11 Option Programming 3 Digits (Cont d) /--------- Long Tone DTMF 1 Digit Telephone Owner | ( Normally disabled 1 = Enabled 0 = Disabled ) |/-------- For Future Use 1 Digit Always O || ||/------- Eight-hour Timeout 1 Digit Telephone Owner ||| ( Normally enabled I = Disabled O = Enabled ) ||| ___ Optional Programming Data Entry Step number - This number is the message that appears in the display during programming (OCR'ed and edited by Andy Rabagliati )