Article: 8834 of comp.sys.laptops Newsgroups: comp.sys.laptops Path: uwm.edu!spool.mu.edu!torn!skule.ecf!drill.me!ie.utoronto.ca!xiao From: xiao@ie.utoronto.ca (Yan Xiao) Subject: Another successful story of nursing dead battery Message-ID: Summary: Open it up, find the bad cell, reverse its polarity, DONE Keywords: plyers, fainted Organization: University of Toronto, Department of Industrial Engineering Date: Wed, 20 Jan 1993 15:48:07 GMT Lines: 23 Here is my experience of fixing a dead batter. Problem: the battery won't hold any charge, but can be used when AC plug is in (so what's the use of the laptop) Hypothesis: The polarity of one of the cells is reversed somehow. Treatment one: use a car battery to reverse the bad cell potential side effect: explosion Treatment two: open it up and check for bad cell to see if it can be fixed. side effect: breaking the nice outfit I chose the second method. It required a little resolution to open the battery case (T1000SE), but not too bad. Using a simple flashlight bulb, I located the bad cell. Then I used another 7.2v battery to apply to this cell, and verified its working by the flashlight. I had to use tape to bound the battery in good solid condition. Results: it now can holds about 90min of charge. Xiao